Applied standards
- TCVN 3223: 2000 E432
- ASME/AWS A5.1 E6013
- EN ISO 2560-A-E 35 0 R
- JIS: D4313
- GB: E4313
Characteristics – applications:
- VD-6013 is the electrode under the group of high rutile sheath. The welded joints are less defective and easy to ignite arc in which arc is stable without splashing and slags are self-blistered. The well-fined welded joints are ductile and have endurance bending strength.
- Suitable for welding low-carbon steel under 430 ~ 490 Mpa load such as rolled-steel structures, ship’s shell, basin, etc.
- Welding at all positions including vertical welding from top to bottom
Chemical composition (99%):
C | Mn | Si | P | S | |
Required | Not required | ≤ 0.04 | ≤0.03 | ||
Obtained | 0.075 | 0.40 | 0.23 | 0.033 | 0.014 |
Mechanical property of weld metal:
Yield strength (Mpa) |
Tensile strength (Mpa) |
Elongation (%) |
impact value (J) |
|
Required | ≥ 331 | ≥ 414 | ≥ 17 | Not required |
Obtained | 400 | 490 | 27 | 00C: 60, Room temperature: 75 |
Instructions for use:
- Clean oil, grease and dust before welding
- If the electrode is wet, dry it at 70 ~100 0 C for 30 ~60 minutes before welding
- Process welding edges as regulated
- Select appropriate welding current to avoid possible defects
- Use AC or DC± power
- Size of the electrode and used current:
Diameter (mm) | Φ 3.2 | Φ 4.0 | Φ 5.0 | |
Length (mm) | 350 | 400 | 400 | |
Amperage (A) | Flat welding | 90~140 | 140~190 | 180~240 |
Vertical welding & Bare welding | 80~130 | 120~170 | 160~210 |